& nbsp; Centrifugal blower, as a type of blower, is currently used in many electrical appliances. When the centrifugal blower is working, the wheels rotate at high speed, driving the air to be used at high speed, forming wind pressure, and supplementing fresh air.

  & nbsp; From the working principle of a centrifugal blower, the compression process of air is usually carried out through several working impellers under the action of centrifugal force. The pressure flow characteristic curve of a centrifugal blower is a straight line, but due to frictional resistance and other losses inside the fan, the actual pressure and flow characteristic curve gradually decreases with increasing flow rate. The power flow curve of a centrifugal blower increases with the increase of flow rate. Increase and rise. When the fan runs at a constant speed, the working point of the fan will move along the pressure flow characteristic curve. The working point of a fan during operation depends not only on its own performance, but also on the characteristics of the system. When the resistance of the pipeline network increases, the pipeline performance curve will become steeper.

  & nbsp; From the appearance, the centrifugal blower is beautiful and elegant, with good stability and performance, and easy to install and maintain in the future. During operation, optimized design is adopted to minimize axial force, and efficient impellers are equipped with dynamic and static balance correction to ensure smooth operation of the entire machine. There is no friction during operation, so the noise generated is very small. In addition, there are devices that can be used for sound insulation. There is basically no noise heard from the outside world. The blower bearings are lubricated with grease, and the bearing life is over three years. The fan does not produce oil or gas during operation. Fans with special requirements use lithium molybdenum disulfide grease lubricated bearings. The impeller adopts a special curve to reduce internal leakage and improve volumetric efficiency. Good sealing performance can reduce gas leakage. In terms of driving mode, motors with different voltages can also be used according to the characteristics of the user's power grid.

  & The SMAIT series blower is very good at drying, processing air, blowing or vacuuming, and is widely used in chemical manufacturing, vacuum and other fields. As a blower with many advantages, it can be used in special environments, is easy to use, and has very flexible operation. The product quality is excellent, and there is no need to worry about any malfunctions during daily use. You can choose to use it with confidence.